3D printing
PETG 3D Printer Filament 1.75mm — 4kg (Black/White/Red/Blue)
Product description
This pack contains four separate spools, each weighing 1 kilogram, for a total of 4 kg of 1.75mm PETG filament in black, white, red and blue. The material is PETG — engineered to give easier printing than ABS while offering greater toughness and impact resistance than PLA.
The filament is suitable for functional parts, prototypes, brackets, tools and other items that need durability and repeated use. It provides high mechanical strength, elevated heat resistance versus PLA, and strong interlayer bonding so printed parts hold up under bending and stress.
Manufactured to a tight dimensional tolerance of ±0.02 mm for smooth extrusion and dependable feeding, each spool is wound to reduce tangles and interruptions during long prints. PETG’s low shrinkage and resistance to warping help maintain consistent dimensional accuracy across prints.
Each spool is fully dried, vacuum-sealed and shipped with desiccant to protect the filament from moisture and reduce issues such as bubbling or nozzle clogs. The spools are compatible with most 1.75mm FDM 3D printers and common filament management systems.
For storage, keep opened spools in a dry, ventilated area away from direct sunlight, high heat and humid conditions. Use the filament soon after unsealing for best results; if moisture is suspected after opening, dry the filament prior to printing.
Pros
- Good toughness and heat resistance
- Tight ±0.02 mm diameter for consistent feeding
- Vacuum-sealed spools with desiccant
Cons
- Limited brand support information
- Color selection may be basic for some users
- May require drying before long-term storage
VerdictA solid value PETG multi-pack for functional printing. The filament prints with reliable layer adhesion, low warping and consistent feeding thanks to tight diameter tolerance and careful spooling. Color options cover everyday needs; the only caveat is limited brand support information for some buyers.
Reviews
-
Reviewer 5/5
Solid value workhorse for functional prints
This four-pack has been dependable for my projects. I popped a spool in the dryer first, though the readout showed low moisture to start. The filament quality is consistent, colors look good, and the spools aren’t flimsy. It runs well in my AMS system and performs similarly to other PETG I use.
-
Wes 5/5
Generic brand but surprisingly reliable
I couldn't find much about the maker online and assumed it's a no-frills white-label filament. That said, performance has been very good. The pack contains four 1kg spools in black, white, red and blue. Every color has fed cleanly through my printer and prints have come out solid despite the unknown brand origins.
-
McKenzie Penworks 5/5
No drama, just prints
Tried this PETG in an AMS setup using generic PETG settings and only slightly slowed the outer wall. I didn’t dry it before use — unboxed, loaded and printed with minimal stringing. Layers bonded well, color saturation is bright, and prints were trouble-free so far; I still have the black spool to test later.
Comments
No comments yet.
Sign in or sign up to comment.